Eight fixtures. One standard of light.
Every fixture below is built to the same promise: 90+ CRI as standard, 98+ optional, and high R9 so deep reds, skin, food, and merchandise look the way they should. Pick a fixture to see its specs and exactly what its color quality does for your space.
Color quality, on every fixture
CRI tells most of the story. R9 tells the rest.
CRI scores how truthfully a fixture renders color. R9 measures the hardest and most important color, deep saturated red, the one hiding in skin, food, and merchandise. A fixture can post a CRI of 90 and still render red poorly. Elite tunes for both, on every fixture below. See the full explainer.
LED Track Lighting
LED Track Lighting
An LED track system that turns one run into a complete accent toolkit. Built on single and two-circuit track, it carries aimable track heads and compact mini track that attach and reposition anywhere along the run. It is the fastest way to relight a space without a contractor, which makes it the backbone of retail and feature lighting. LED only, with no CFL, incandescent, or low-voltage incandescent.
- One track, many heads: load a single run with accent track heads, wall-wash heads, and compact mini-track heads, then re-aim them as the floor changes.
- Single or two-circuit: switch or zone separate groups of heads on the same run where you need independent control.
- Interchangeable optics: tight spot, flood, and wall wash to cover hero product, general fill, and vertical surfaces.
- Selectable color: 3000K, 3500K, or 4000K with 90+ CRI and high R9 for true reds and skin tones.
- Tool-free and reconfigurable: stores re-merchandise in minutes instead of booking a contractor.
Track lives and dies on accent quality. Because its whole job is to put a beam on a product, color rendering is everything. High-CRI heads with strong R9 keep reds, woods, leathers, and skin tones true, so what the beam hits looks as rich in the store as it did in the campaign. Specify 90+ CRI, or 98+ for flagship displays.
Where it shines: Retail feature walls and apparel, fashion and furniture showrooms, hospitality art and lobbies, museums and galleries, and commercial brand walls. Anywhere displays change often, or a saturated red or warm wood has to read true.
Specifying an LED track run
What we lock into the master specification so every location orders the same kit.
1. Track & layout
Total run length, straight or cornered, and mounting: recessed, surface, or suspended. Single or two-circuit where zones need separate switching.
2. Heads on the track
The mix of accent track heads, wall-wash heads, and compact mini-track heads, with the quantity each run needs.
3. Optics & beam angles
Spot for hero product, flood for general fill, and wall wash for vertical surfaces, sized to the throw distance.
4. Color & quality
CCT of 3000K, 3500K, or 4000K, 90+ CRI as standard or 98+ for flagships, and high R9 for true reds and skin tones.
5. Finish
Texture white or black to blend into the ceiling, or a custom RAL to match the brand environment.
6. Dimming & controls
Dimming protocol and any scene or control requirements, matched to the rest of the National Accounts package.
FC Combo
FC Combo
A recessed multi-head combo, one to four aimable heads in a single housing, up to 3,000 lumens per head with field-changeable spot, narrow flood, and flood optics. One housing can highlight up to four different displays.
The FC Combo is an accent workhorse, and accent is where R9 earns its keep. With 90+ CRI standard and 98+ optional, every head renders deep red faithfully, so a tomato display, a leather handbag, or a cut of meat looks vivid rather than dull. Because each head can carry its own optic and color, you can tune a single housing to flatter four very different products at once.
Where it shines: Retail merchandising, supermarket fresh departments, hospitality lobbies, commercial feature lighting.
FC1 spec sheet
FCM Mini Combo
FCM Mini Combo
The combo idea in a compact module, one to four interchangeable heads at 1,000 lumens each. Perfect for tighter ceilings and detailed displays where the full-size combo is more than you need.
The mini combo carries the same 90+ CRI color quality as its larger sibling into smaller apertures, so an end cap or a jewelry case gets the same honest, high-R9 accent as a flagship display. Reds stay saturated and metals stay true, even from a discreet 3.5-inch module.
Where it shines: Retail end caps and small displays, supermarket promotions, boutique hospitality accents.
FCM1 spec sheet
FPR Pendant
FPR Architectural Pendant
A clean architectural pendant for restaurants, lobbies, and open plans, 1,200 to 2,200 lumens, with a Warm Dim option that warms as it dims like incandescent. It hangs in view, so it does double duty as light and as decor.
Pendants hang over the two things that punish bad color most: food and people. With 90+ CRI and strong R9, the FPR keeps a plate of food appetizing and a guest's skin healthy and warm rather than sallow. Even as Warm Dim takes the light into rich amber tones, the high CRI holds, so the color stays honest at every dimming level, not just at full output.
Where it shines: Hospitality restaurants and lobbies, retail checkout, commercial amenity and break areas.
FPR1 spec sheet
HH Series
HH Modular Downlight
A modular downlight family from 4 to 10 inch apertures, 500 to 24,000 lumens, with CRI up to 98. One platform covers everything from a guest room to a supermarket aisle to an atrium.
HH usually carries the general, ambient layer, which is exactly why its color quality matters more than people expect. If the base light rendering is poor, no amount of good accent can fix the room, the whole space reads flat. With CRI up to 98 and high R9, HH makes the entire environment render true from the ceiling down, so skin, surfaces, and product look right everywhere, not just under the spotlights.
Where it shines: Commercial offices and lobbies, supermarket aisles, hospitality, large-format retail. The base layer for almost any space.
View HH options
A1
A1 Precision Micro-Downlight
A 1-inch adjustable or fixed micro-downlight for the most detailed accenting, where the fixture should disappear and only the light remains. The smallest, most discreet tool in the kit.
A1 is built for the highest-value, most detailed targets: jewelry, art, a single hero object. Those are exactly the places where a weak R9 is unforgivable, a diamond's sparkle and a painting's reds depend on it. Elite's 90+ CRI keeps that tiny, precise beam color-true, so the detail you paid to light actually shows.
Where it shines: Hospitality guest rooms and intimate spaces, retail jewelry and detail displays, gallery and art accenting.
A1 spec sheet
A2
A2 Architectural Adjustable
A 2-inch architectural adjustable with field-changeable optics, a wall-wash option, and round or square trims to match any ceiling. Tilts to 40 degrees and rotates a full 360.
As an accent and wall-wash fixture, A2 spends its life lighting merchandise and vertical surfaces, both of which the eye judges harshly for color. With 90+ CRI and strong R9, a wall of product or a textured feature wall renders with true depth and saturation, so reds and warm materials look intentional rather than washed out.
Where it shines: Retail perimeter and feature displays, hospitality wall washing, commercial corridors and offices.
A2 spec sheet
ER3
ER3 Precision Recessed
A 3-inch precision recessed downlight with class-leading aiming, 11 beam spreads, and an IP65 option. Downlight, adjustable accent, and wall wash in one refined family, our most design-forward recessed line.
ER3 is the fixture you specify when the project cannot afford to look ordinary, and its color quality matches that ambition. With CRI up to 98 and gallery-grade R9, it renders art, architecture, and merchandise with the fidelity of natural daylight. This is the tier where deep reds, fine gradients, and subtle finishes all hold true, the standard museums and flagships demand.
Where it shines: Flagship retail and galleries, premium hospitality, corporate lobbies and brand spaces.
View ER3 optionsOne color standard, every fixture, every location.
Ask us for the CRI and R9 data on any fixture here, and we will build a National Accounts spec that holds that quality across your whole portfolio.