Most suppliers stop at the fixture. We make the rest. Emergency, controls, housings, retrofit kits, exterior, fans, and the documentation that holds it all together — engineered and assembled in Anaheim, on one master specification.
Why this matters
On a multi-site rollout, the work isn't only in the fixture, it's in the parts that surround it. The emergency battery, the trim that matches the ceiling, the retrofit lamp that holds CRI. National Accounts covers all of it, on the same master specification and the same warranty as the fixtures.
The twelve categories
Code-compliant egress for every location, from the exit sign over the door to the 90-minute emergency driver in the ceiling. Spec'd to local code requirements, listed on the submittal, and stocked for replacement.
LED exit signs (edge-lit, thermoplastic, die-cast) | Combo exit / emergency units | Emergency LED drivers (7W, 10W, 14W) | Central inverters & battery backup | Self-test & self-diagnostic options | Wet-location & cold-weather rated
Code-driven and energy-driven controls, from a single occupancy sensor to a building-wide system. Pre-coordinated with the drivers and fixtures on the spec.
Occupancy & vacancy sensors | Daylight harvesting photocells | Wall-box & in-line dimmers | 0–10V, DALI, wireless mesh | Room controllers & relay packs | Title 24 & ASHRAE 90.1 packages
The right can or frame for the ceiling you're working with, plus the brackets, bar hangers, and plaster frames the installer needs on the truck.
New construction housings (IC, non-IC) | Remodel cans, shallow ceiling | Plaster frames & mud rings | Bar hangers, T-bar clips, junction boxes | Surface & pendant canopies | Track stems, couplers, end caps
Beam control and finish, field-changeable on most platforms. The same housing can be a wall-wash today and a 15-degree spot tomorrow, no re-spec.
Spot, narrow, medium, wide, very-wide | Linear, wall-wash, elliptical | Snoot, honeycomb, color filters | Black, white, bronze, brushed trims | Frosted, prismatic, regressed lenses | Field-changeable on FC, FCM, A2, ER3
LED replacements for the housings you're keeping, with the same CRI and R9 standards as our new fixtures. The fast path to better light without a full re-fit.
A19, BR30, PAR20/30/38 lamps | MR16, GU10, GU24 | Linear T8 retrofit (Type A, B, C) | Downlight retrofit modules (4″, 6″) | High-bay & canopy retrofit kits | Decorative filament & specialty
The small parts that finish the install: trims, gaskets, mounting kits, and hardware that travel with the fixtures so the install crew isn't waiting on a back-order.
Trim & finish rings | Gaskets & seals (wet-location) | Mounting kits & brackets | Lens swap-out kits | Glare baffles & snoots | Touch-up paint & finish hardware
Commercial and hospitality-grade fans with integrated light kits, matched to the room CCT and the rest of the lighting on the spec.
Hospitality & guest-room fans | Large-diameter HVLS (warehouse, gym) | Exterior & damp-location rated | Integrated LED light kits | Wall, remote, smart control | Energy Star qualified options
The night-time face of the brand. Code-driven, dark-sky friendly where required, and matched in CCT to the interior so the building reads as one.
Wall packs & full-cutoff sconces | Parking lot & site poles | Canopy & gas-station luminaires | Bollards & landscape | Flood & security floods | Dusk-to-dawn photocell options
The fixtures that don't fit the standard catalog. We source, spec, and warranty them inside the same program.
UV-C disinfection (upper-air, surface) | Horticulture & grow lighting | Color-changing & tunable white | RGBW, RGBA, dynamic white | Cove, linear, & architectural strip | Channel letter & signage power
The right SKU for the jurisdiction. We pull the compliance package out of the catalog instead of the architect chasing it.
Energy Star & DLC-listed SKUs | JA8-2019 Title 24 (California) | BABAA / Buy America compliant | IECC & ASHRAE 90.1 packages | Chicago Plenum, NYC Lumen, MEA | Wet, damp, marine, IP65/IP66
The catalog doesn't end when the building opens. We make and stock the parts your facilities team will need in year three, year five, year ten.
Replacement LED modules | Trims, lenses, gaskets, hardware | Touch-up paint & finish kits | Lamps for legacy fixtures | Field-service kits (tools, fuses, knockouts)
The documents and processes that turn a parts list into a program. Built once for the rollout, refreshed as fixtures and codes evolve.
Master fixture schedule & APL | Submittal packages (PDF + native) | DLC docs & certification packages | Cross-reference list (incumbent → Elite) | Install guides & submittals | Returns & store-by-store tracking
How it works
Your account manager pulls the right SKUs from each category, locks them in the master spec, and matches production to the rollout calendar.
Walk the prototype, document existing parts, confirm what's in scope.
Master fixture schedule with every SKU pulled from the twelve categories.
Production planned to the rollout, built in our Anaheim facility.
Stocking and store-by-store rollout tracking against the program calendar.
Install guides, submittals, and DLC docs to the trade.
Five years, clean returns process, replacement parts on the shelf.
Start your program
Send us your incumbent parts list or a prototype location. We will come back with a cross-reference and a rollout plan that covers every category on this page.